Black Rifle Picture Thread

[ksenter]

I think I'll paint the trigger and put it in my LMT and put a flat one on this. It's a VERY nice trigger. When a trigger allows you to hit steel at 75 yards offhand, while rushing, you know it's good. No creep, no BS, just a clean 3.5# break.
Not even counting the FANTASTIC price , this is a fine trigger. Dave has a demo. Check it out next time you go in.

I've played with that demo probably 12 times already. lol. I've probably almost wore the damn thing out. I'll get one, or two, or three soon enough. I've never spoiled myself with aftermarket triggers, now might be a good time. The 6.8 could use one for an increase in accuracy, the pistol could use one for some badass rapid fire, the REECE could use one...well because the other 2 would have on. The .22lr.....fugg that, it aint gettin one.

 

[TackleberryMCS]

While I was away, I managed to complete a build I was assembling parts for.

Upper Receiver:

TGD Firearms Billet upper receiver (made by New Frontier Armory)
AIM Surplus NiB M16 Bolt Carrier Group
BCM Gunfighter Charging Handle w/ Mod 4 latch
BCM Standard 14.5" Mid Length Barrel, Stripped
BCM Low Profile Gas Block (steel with set screws) 750
Midwest Industries 12-inch Gen2 SS-Series One Piece Free Float Handguard - BLACK
Midwest Industries G2SS PANEL KIT (FDE)
JP Enterprises Compact Tactical Comp with Persuader Front End
MAGPUL MBUS front and rear sights
Aimpoint PRO

Lower Receiver:

TGD Firearms Billet lower receiver (made by New Frontier Armory)
PSA LPK w/ B5 Systems Pistol Grip (FDE)
ALG ACT Trigger
BCM 4-Position Mil-Spec Buffer Tube Assembly (standard carbine buffer)
B5 Systems SOPMOD stock (Mil-Spec)
Seekins Extended Bolt Release
Seekins Magazine Release

 

[Dan1612]

While I was away, I managed to complete a build I was assembling parts for.

Upper Receiver:

TGD Firearms Billet upper receiver (made by New Frontier Armory)
AIM Surplus NiB M16 Bolt Carrier Group
BCM Gunfighter Charging Handle w/ Mod 4 latch
BCM Standard 14.5" Mid Length Barrel, Stripped
BCM Low Profile Gas Block (steel with set screws) 750
Midwest Industries 12-inch Gen2 SS-Series One Piece Free Float Handguard - BLACK
Midwest Industries G2SS PANEL KIT (FDE)
JP Enterprises Compact Tactical Comp with Persuader Front End
MAGPUL MBUS front and rear sights
Aimpoint PRO

Lower Receiver:

TGD Firearms Billet lower receiver (made by New Frontier Armory)
PSA LPK w/ B5 Systems Pistol Grip (FDE)
ALG ACT Trigger
BCM 4-Position Mil-Spec Buffer Tube Assembly (standard carbine buffer)
B5 Systems SOPMOD stock (Mil-Spec)
Seekins Extended Bolt Release
Seekins Magazine Release

Very nice. In essence, it's very similar to my TGD race gun. Have you seen it? It's a page or two back. I figured you'd appreciate all the TGD parts.
No pics of the SCAR yet, I'm waiting to put an optic on the race gun before I transfer the aimpoint. I'm also waiting till I get a trust before I SBR the SCAR.

 

[TackleberryMCS]

I saw your race gun. Nice build. I bet it runs great.

The SPARC is a good choice. I really like the SPARC on this setup I have.

 

[Dan1612]

I love the B5 stocks. They're just as comfortable as my LMT sopmod, but much more affordable. Although the fit is a little bit more loose, but it's not a big deal. I'm a fan of the B5 grip too.

It runs AMAZING! Ian built it since I sold my AR tools (should probably buy some) that barrel is surprisingly light. Main reason I want to run the SPARC is because it's something else TGD carries. I'll save the Micro for the DD. I need a 2 MOA dot because of the astigmatism in my right eye.

 

[TackleberryMCS]

My Retro AR FAmily



Retro Models: XM607, XM177E2, 653, 723 (early), 723 (late), 727, 602, 603/M16A1, SP1 (1977)

 

[Dan1612]

Very nice! Is that the PJ muzzle device on the left? I like the rightmost one best.

 

[TackleberryMCS]

Very nice! Is that the PJ muzzle device on the left? I like the rightmost one best.

It is a non-NFA replica (made by one of the guys on ARFCOM) of the original moderator that came on the XM607. The original is actually baffled to suppress some sound. The replica is not baffled.

 

[TackleberryMCS]

After a couple hours of breaking them all out, lining them up, and putting them all away, here is the result.

The latest pic of my AR Family.

 

[Dan1612]

Thank you for making me feel better about my addiction.

 

[TackleberryMCS]

No problem Dante. I do have another 94 guns to go along with those. :usa2: It is great to be an American.

 

[FrankT]

New x39

 

[JWlineman]

After a couple hours of breaking them all out, lining them up, and putting them all away, here is the result.

The latest pic of my AR Family.

That's just beautiful.

 

[bkitzel250]

I saw that pic on arfcom that is insane. let me know if you need a new bestfriend!!

 

[TackleberryMCS]

Out of all of them, there are two that have I have never fired since I bought them several years ago. one is the 1977 Colt SP1 and the other is a 1993 Colt Sporter Match HBAR (MH6601). Both of these are in pristine condition. The person I bought the HBAR from said he and his son had put only 100 rounds through it. They still had everything that came with it. Even the green labeled box.

 

[FrankT]

Out of all of them, there are two that have I have never fired since I bought them several years ago. one is the 1977 Colt SP1 and the other is a 1993 Colt Sporter Match HBAR (MH6601). Both of these are in pristine condition. The person I bought the HBAR from said he and his son had put only 100 rounds through it. They still had everything that came with it. Even the green labeled box.

Not to get personal but what size safes do you run and are they all insure and by who did you get the best deal?

 

[Dan1612]

That's safe room material, not individual safes.

 

[TackleberryMCS]

Exactly.

 

[ilintner]

Thank you for making me feel better about my addiction.

My sentiments exactly, fantastic collection Sir!

 

[TackleberryMCS]

Thanks guys.