TNW AERO Survial rifle 10mm

[Rebel_Rider1969]

I would really like to see that weapon James. With the scarcity of PCC's this could be a great option for me.
I really like my Beretta CX4 Storm but being a 45ACP just does not have the appeal for me as most any 10..
But now that my Glock 20 is gone,with all it's ammo,I would really have to start all over,buying at todays prices.
I have plenty of hunting/practice 45ACP ammo and support equip (mags,loaders,extra parts,carry cases,etc.) for my Beretta. --- SAWMAN

I'll bring it by when I come over. Those CX4s are nice. I had the 9mm one, should have kept it. I've got a pile of 45 too. I will probably get the bolt, barrel combo. 45 acp out of the 16 inch should have some zip. They make it in 460 Roland too. I saw a video where they were shooting 45 super out of it. Would be a hammer for sure.

 

[FrankT]

I will watch for this one to be for sale soon,hope I get to pick it up cheap!

 

[Rebel_Rider1969]

I will watch for this one to be for sale soon,hope I get to pick it up cheap!

I do have a WC hi-point 10mm that needs a home!

 

[Rebel_Rider1969]

Gotta figure out how to lock the barrel down though. It's about annoying and screws up the accuracy.

 

[SAWMAN]

Oooooooooo .... 460R huh ??
Coming closer to 44Mag power but cutting a big hole.
Problem with the Rowland is brass availability. I would probably just go with 45Super but you gotta handload or be rich. ---- SAWMAN

 

[Rebel_Rider1969]

Put polish on the trigger surfaces and worked it about 1000 times. Sore fingers but it is ALOT better. Now to solve the narrow sharp trigger issue. Thought about using a small piece of rubber hose or heat shrink. Unfortunately they use their trigger system not an AR one, kinda dumb huh.

 

[Duckyou]

Put polish on the trigger surfaces and worked it about 1000 times. Sore fingers but it is ALOT better. Now to solve the narrow sharp trigger issue. Thought about using a small piece of rubber hose or heat shrink. Unfortunately they use their trigger system not an AR one, kinda dumb huh.

File it into a better shape. Take the sharp edges off - maybe a bit flatter profile.

 

[SAWMAN]

Bring it over. I will smooth the sheite outta it for you. The sides look kinda sharp/rough. ---- SAWMAN

 

[FrankT]

Is this for sale yet?

 

[SAWMAN]

After I "fix it" for James,he will sell it and pocket the profits. --- SAWMAN

 

[Rebel_Rider1969]

I really like it. Any other TNW Aero's out there?? @Mullet Hunter

 

[Rebel_Rider1969]

10mm test target. High shoulder shot? Winchester silvertip 175gr hp?

 

[Rebel_Rider1969]

According to BBTI the Silvertip is doing 1384fps at the barrel. 16inch. Don't know the math to make the footpounds.

 

[capt.joe]

I think on bbti in the upper of the page, you can click to open the energy graph

 

[Rebel_Rider1969]

I think on bbti in the upper of the page, you can click to open the energy graph

Yep, just looked only 860 or so. Figured it would be higher.

 

[Rebel_Rider1969]

Stock is a bit wiggly and don't like it. Maybe the ctr stock is a commercial one? Going to try this stock.

 

[Rebel_Rider1969]

Used a pipe wrench and leather wrapped around the barrel, and tightened the set screw down. Have to see if it works loose.

 

[capt.joe]

I still remember cringing after all i read on how to build an ar, and i reached out to one shot who put my upper together because i didnt have the tools. He said " you may want to look away". It works!

 

[Rebel_Rider1969]

I still remember cringing after all i read on how to build an ar, and i reached out to one shot who put my upper together because i didnt have the tools. He said " you may want to look away". It works!

It already had dings on the nut, so no big deal. It's a woods shooter. Interested in trying a G29 mag in it, can buy or swap.

 

[Rebel_Rider1969]

Come here deer!! In stand before daylight! Didn't see crap. At 5am this was in my plot..crap.