Need help

[CCHGN]

I have a a dozen .223 rounds that the bullets have sunk into the casing, to where only 1/4" is sticking out. Can they be repaired? Anybody want them?

 

[XnotedgeanymoreX]

Dismantling the rounds with a bullet puller is a pretty straight-forward task. You can probably borrow one from a member if need be.

How did they end up like this, improperly adjusted bullet seating die or compression after they were loaded?

 

[TennJeep1618]

You might be able to pull them with an inertia-type puller.

Are they factory rounds? Were the bullets set back into the cases from hitting the feed ramp?

 

[CCHGN]

You might be able to pull them with an inertia-type puller.

Are they factory rounds? Were the bullets set back into the cases from hitting the feed ramp?

They may have come in a batch that I bought, I've never had any feeding issues with this AR

I don't have a puller( I tried pulling them out with pliers, but they just slipped off). If anyone wants them, they're free.

 

[Khaot1c]

Pliers will probably gouge the bullet. I don't own a bullet puller either. I've typically just scraped rounds I messed up- well, that was before primers became more valuable than a brick of gold that was pooped by the Mona Lisa herself. I'd try and salvage what ya' could. I'd take em' but I'm way out in Shalimar.