Reloading Components for Trade - Item, Value and Photo

[Cheaha]

If anyone has an RCBS Lil' Dandy powder charger, I got this rotor in a lot of reloading tools. It took me a while to figure out what it is. It is marked 2.7, which is odd since the RCBS chart only shows whole numbers.

It's free to anyone who wants to come get it or pay for shipping. I am in Baldwin County. PM for details.

 

[Bodhisattva]

Free to a good home, as in @payitforward.
Found this over the weekend in my tools. I don’t have a 7-08.

 

[Bodhisattva]

Another find in the reloading tools this weekend. Open to any reasonable offers. Appears to have never been used, or if so, very little.

 

[Andronicus54]

got a few cases I won't use for open trade

64ea 350 Legend
22ea 450 Bushmaster
489ea 7.62X39
25ea 7.5X55
19ea 6.5X55SE
34ea 308 Arrow
108ea 6.5 Grendal
37ea 7.62X54R
25ea 8MM Mauser
32ea 6MM Rem
27ea 300 Hammer
48ea 224 Valkyrie several loaded
5ea 300 PRC
9ea 280 Remington
14ea 41 Mag
137ea 45 Colt traded
500+ .357SIG

I could use your 6.5 Grendel cases. What are you looking to trade for?

 

[Andronicus54]

My new reloading room is still under construction, so most everything is packed away. I will throw this out there though, I’m looking for 1lb of VV N120 and/or a 4lb N320. Have all the usual suspects for trade as far as powders & primers are concerned. With any luck, I should be getting things set back up in about 3-4 weeks and will be able to post trade inventory.

Do you have any Ramshot True Blue?

 

[Jester896]

I could use your 6.5 Grendel cases. What are you looking to trade for?

,223, 7mm-08, 9mm, .45ACP LP or projectiles. I will throw the Arrows in with them

 

[Andronicus54]

I think I have a bunch of .45 brass and no longer load for it. And I have plenty of of .223 brass, as well as military 5.56 that is crimped. Which would you prefer? Ever come to the Panama City area? Or should we assume a trade via shipping? I've never even heard of the .308 Arrow until you mentioned it. I really don't have a need for it.

 

[Andronicus54]

Free trade - 30 Carbine, 44 mag and 308/30-06 Dillion 450 shell holder plates.

Did you find a home for your .308/30.06 Dillon shell plate? If not, what are you looking to trade for in reloading components?

 

[Metal Storm]

Did you find a home for your .308/30.06 Dillon shell plate? If not, what are you looking to trade for in reloading components?

Sorry these are gone.

 

[Jester896]

I think I have a bunch of .45 brass and no longer load for it. And I have plenty of of .223 brass, as well as military 5.56 that is crimped. Which would you prefer? Ever come to the Panama City area? Or should we assume a trade via shipping? I've never even heard of the .308 Arrow until you mentioned it. I really don't have a need for it.

If it is .45ACP Large Primer I will swap piece for piece. I have every thing I need to handle crimped primer pockets if you want to go piece for piece with that. I don't get to PC very often. I am about 1.5 hrs N of Marianna if you want to meet half way. Shipping might be easier. I think the .308 Arrow and 6.5 Grendel use the same parent case. Necks might get a little thick but you could try them.

 

[Sam 270]

Got a bulk jyg of longshot willing to trade or sell 2lbs. New stock in ac climate

 

[jimbonecrusher]

Would anybody have any need for 8mm Mauser ammo? I had a family friend who passed away. I was given about 190 rounds of 8mm Mauser reloads. I have no information for the loads as they were simply packed in a box and the gentlemen who made them passed away. The quick measurements I do have is as follows: case length = 3.0575" bullet diameter .3215" case length 2.2235"

I'd be willing to trade for reloading items or a nice bipod. Not sure of the value on these rounds, but willing to discuss.

I know that there is always concern with shooting another reloaders recipe. It is all mixed brass with some being 30/06 brass resized for 8mm.

 

[Sam 270]

223 reloading stuff,I got close to 1/2 lb varget,310 win small rifle primers,175 once shot cases,70 ballistic tip bullets,3 piece set lee. Dies about 100.00 dollars value first 80.00 or trade for 2 lbs 296 0r h 110

 

[Orion]

No, but thanks for asking.

 

[suppo]

I have the following powders for trade. H414, H4198, H1000, H 870, Titegroup, CFEpistol, IMR 3031, IMR 4895. I will trade even up pound for pound for shotgun powders. Main interest is Clays or Clay dot. Also interested in Red dot, Blue dot, 800X, 700X, Steel, Unique, SR 4756 and SR 7625. Some of these I may have more than one pound so just ask and we will see what we can work out. Located in Shalimar or Bonifay.

 

[suppo]

I have about 3/4 of a pound of Red Dot and not quite 1/2 pound of Hodgdon HS-6 I'd like to (I'd call it a pound as a lot for trade) any interest?

 

[RaySendero]

I have two boxes (ea. 50) of .366 Swift-A 300 grain bullets to sell or trade.

 

[suppo]

I have the following powders for trade. H414, H4198, H1000, H 870, Titegroup, CFEpistol, IMR 3031, IMR 4895. I will trade even up pound for pound for shotgun powders. Main interest is Clays or Clay dot. Also interested in Red dot, Blue dot, 800X, 700X, Steel, Unique, SR 4756 and SR 7625. Some of these I may have more than one pound so just ask and we will see what we can work out. Located in Shalimar or Bonifay.

I have the following powders for trade. H414, H4198, H1000, H 870, Titegroup, CFEpistol, IMR 3031, IMR 4895. I will trade even up pound for pound for shotgun powders. Main interest is Clays or Clay dot. Also interested in Red dot, Blue dot, 800X, 700X, Steel, Unique, SR 4756 and SR 7625. Some of these I may have more than one pound so just ask and we will see what we can work out. Located in Shalimar or Bonifay.

I have a little more than ¾ of a pound of Red Dot Shot Shell and a little less than ½ pound of Hodgdon HS-6. I would trade all as a one pound lot. If you are interested I am looking for IMR 4895. suppo

 

[Boogan1]

I have a little more than ¾ of a pound of Red Dot Shot Shell and a little less than ½ pound of Hodgdon HS-6. I would trade all as a one pound lot. If you are interested I am looking for IMR 4895. suppo

View attachment 296675

Sorry, all my powder has been traded.

 

[suppo]

Sorry, all my powder has been traded.

Roger that, thank you for the quick response. Suppo