Ive had an agency arms syndicate 80% frame and lower parts kit sitting around for a year and finally decided to mill it. Took me the better part of last Sunday but i managed to get all the parts in, and have a zaffiri slide and barrel for it. I’m having a couple issues and wondering if there are any 80% gurus that can help me out here since the local shops wont touch it due to lack of serial number.
My main issue is that the slide gets a little hung up as it goes on, then the ejector hits the back plate. I can’t see anything obvious that its binding up on or that is clearly wrong. I taped the jig tightly closed when I went to mill it, and put it in a drill press vise to drill, but did use a handheld cordless drill. Photos for reference.
This is my first 80 build so I have no idea what I‘m doing. All my research turned up was that the locking block may be out of spec or I should swap the ejector. Unfortunately I can’t try and get replacement parts as I bought the frame private sale not direct from manufacturer. Any ideas?
My main issue is that the slide gets a little hung up as it goes on, then the ejector hits the back plate. I can’t see anything obvious that its binding up on or that is clearly wrong. I taped the jig tightly closed when I went to mill it, and put it in a drill press vise to drill, but did use a handheld cordless drill. Photos for reference.
This is my first 80 build so I have no idea what I‘m doing. All my research turned up was that the locking block may be out of spec or I should swap the ejector. Unfortunately I can’t try and get replacement parts as I bought the frame private sale not direct from manufacturer. Any ideas?
Attachments
-
0ACC3291-E0C2-4C75-8324-1C464D0D0968.jpeg411.7 KB · Views: 79
-
DA2ADAFA-40F7-4BF5-8801-938CA8F801C5.jpeg588.7 KB · Views: 78
-
7A622111-4867-4C60-857D-C73ACAAEF3A2.jpeg460.4 KB · Views: 74
-
3F89F55A-83CE-4EE1-AABA-D0A589FA8F79.jpeg360.2 KB · Views: 70
-
96E0DC7A-DDD6-4E8B-A903-03C4AA48B8C3.jpeg298.5 KB · Views: 68
-
7B527E5C-E0FD-4A5F-A249-154D7894AC2D.jpeg926 KB · Views: 64