Pf9 problem

[Aaronious45]

Me, wife, friend shot quite a bit today. Me and the wife were shooting my reloads in my s&w and her keltec. Any factory ammo she's shot from her PF9 works fine. Any of my reloads pretty frequently FTF due to light primer strikes. I haven't had any FTF at all in my s&w. My buddy was shooting his PF9 and shot quite a few of my reloads with no trouble.
Could her PF9 have a shorter firing pin, weak firing pin spring or what??

 

[Iwb4me]

Maybe firing pin spring. I had an issue with my pf9, contacted keltec and they sent replacement parts free of charge.

 

[Ken232]

I had the same problem with mine a few years back. I broke it down removed the firing pin and found it was dirty in the firing pin hole cleaned it out good with gun blast and it worked fine after that.

 

[Aaronious45]

Makes me feel better. I'll try taking it apart and cleaning it really well before I call keltec.
If I take this apart to some degree of not getting it back together, y'all will be there for me, right?

 

[FrankT]

Buff and polish it while apart like should have been done in the first place and it will really be a nice shooter.

 

[Aaronious45]

My buddy has done that with his and I can tell a very noticeable difference frank. I'll work on cleaning/polishing this week. Shoot it again on my next days off and see how it goes

 

[The Pitt]

Take a drill bit by hand and remove burrs where the firing pin rides internally. Had similar problems with a former Keltec, I sold that problem child for cheap.

 

[FrankT]

your wife will really like it, it will be like her Mothers Day present