Select the appropriate items from the drop down menus on here (http://data.hodgdon.com/cartridge_load.asp) and it will give you some load data. I would try to check it against at least one other data source, though.
with new powders sometimes they dont have data yet. research burnrate and compair with other powders of the same rate.start with less than min and work up till you see presure signs on the primmer backup 5% should be good. i had to do this with superformance for 6mm 100 gr..
with new powders sometimes they dont have data yet. research burnrate and compair with other powders of the same rate.start with less than min and work up till you see presure signs on the primmer backup 5% should be good. i had to do this with superformance for 6mm 100 gr.. let me know how it works ,i like the idea of cfe.