MichaelWinne
Shooter
Custom AR15 pistol build
Milton, FL
Text Mike at 303-518-6212
$975
Hey guys I'm looking to sell my pistol build, I don't get a whole lot of time to shoot between deploying and spending time with family so I'm going to let it go and pay off some debt. I have a lot of time and quality parts in this build, and it shoots wonderfully. I will list all of the parts installed below and links to the websites where I purchased the items and that way you can read some reviews.
I would like to put a disclaimer, just in case someone in here is unfamiliar with AR15 pistols. This pistol does not have a stock on it, it has a stabilizing brace. The pistol is not designed to be shoulder fired, because that would essentially make it a short barreled rifle, and without a tax stamp you are committing a felony. You also cannot install a vertical foregrip on the rail. You can legally install an angled foregrip, like the Magpul AFG.
Alright, now that that's out of the way, I will go ahead and post parts and prices and links.
Spike's Tactical Lower Receiver - $115
http://www.spikestactical.com/lower-multi-forged-spider-firesafe-markings-p-604.html
Spike's Tactical Upper Receiver - $115
http://www.spikestactical.com/upper-receiver-forged-m4-flat-top-multi-cal-p-123.html
Fortis REV 12 Free Float Handguard - $220
http://fortismfg.com/ar15-fortis-REV-free-float-rail-system-12-forearm-12
KAK Industries Shockwave Stabilizing Brace Kit - $95
https://www.kakindustry.com/shockwave/shockwave-package-black
KAK Industries Slimline Flash Can - $35
https://www.kakindustry.com/ar-15-p...ks/1-2-28-threads/kak-industry-slim-flash-can
AIM Surplus BCG - $80
http://www.aimsurplus.com/product.a...T+9310+MPI+BDG+Bolt+Carrier+Group&groupid=723
Vortex SPARC Red Dot - $200
http://www.vortexoptics.com/discontinued/vortex-sparc-red-dot-scope
Phase 5 Tactical EBRV2 - $50
http://phase5wsi.com/extended-bolt-release-v2.html
Phase 5 Tactical Winter Trigger Guard - $25
http://phase5wsi.com/winter-trigger-guard-styled.html
PSA Lower Parts Kit w/ Magpul MOE Grip - $60
http://palmettostatearmory.com/moe-lower-parts-kit-black.html
Magpul ASAP - $30
https://www.magpul.com/products/asap-ambidextrous-sling-attachment-point
LaRue Tactical Handstops - $25
http://www.larue.com/larue-tactical-handstop-2-piece-set
The barrel assembly came off of a barreled upper that I purchased a while back, the barrel is a 1/9 5.56 stainless steel 10.5" barrel with a carbine gas system. The low profile gas block and carbine length gas tube came pre-installed. I'd value the barrel around $100-120.
I'd like to note that the KNS roll pins will not be included, as the trigger that's currently installed will be removed and replaced with a mil-spec trigger assembly. Also, no magazines are included either.
If we do the deal I will obviously require both parties to fill out and sign a bill of sale, to protect both the buyer and seller. If you would rather go through an FFL holder to transfer the firearm I am perfectly ok with that. If you'd like to buy some ammo and meet me at a range to fire and function check the weapon I'd be perfectly ok with that as well. If you have any questions please don't hesitate to text me at 303-518-6212 any time. Thanks for looking! Happy shooting!
Milton, FL
Text Mike at 303-518-6212
$975
Hey guys I'm looking to sell my pistol build, I don't get a whole lot of time to shoot between deploying and spending time with family so I'm going to let it go and pay off some debt. I have a lot of time and quality parts in this build, and it shoots wonderfully. I will list all of the parts installed below and links to the websites where I purchased the items and that way you can read some reviews.
I would like to put a disclaimer, just in case someone in here is unfamiliar with AR15 pistols. This pistol does not have a stock on it, it has a stabilizing brace. The pistol is not designed to be shoulder fired, because that would essentially make it a short barreled rifle, and without a tax stamp you are committing a felony. You also cannot install a vertical foregrip on the rail. You can legally install an angled foregrip, like the Magpul AFG.
Alright, now that that's out of the way, I will go ahead and post parts and prices and links.
Spike's Tactical Lower Receiver - $115
http://www.spikestactical.com/lower-multi-forged-spider-firesafe-markings-p-604.html
Spike's Tactical Upper Receiver - $115
http://www.spikestactical.com/upper-receiver-forged-m4-flat-top-multi-cal-p-123.html
Fortis REV 12 Free Float Handguard - $220
http://fortismfg.com/ar15-fortis-REV-free-float-rail-system-12-forearm-12
KAK Industries Shockwave Stabilizing Brace Kit - $95
https://www.kakindustry.com/shockwave/shockwave-package-black
KAK Industries Slimline Flash Can - $35
https://www.kakindustry.com/ar-15-p...ks/1-2-28-threads/kak-industry-slim-flash-can
AIM Surplus BCG - $80
http://www.aimsurplus.com/product.a...T+9310+MPI+BDG+Bolt+Carrier+Group&groupid=723
Vortex SPARC Red Dot - $200
http://www.vortexoptics.com/discontinued/vortex-sparc-red-dot-scope
Phase 5 Tactical EBRV2 - $50
http://phase5wsi.com/extended-bolt-release-v2.html
Phase 5 Tactical Winter Trigger Guard - $25
http://phase5wsi.com/winter-trigger-guard-styled.html
PSA Lower Parts Kit w/ Magpul MOE Grip - $60
http://palmettostatearmory.com/moe-lower-parts-kit-black.html
Magpul ASAP - $30
https://www.magpul.com/products/asap-ambidextrous-sling-attachment-point
LaRue Tactical Handstops - $25
http://www.larue.com/larue-tactical-handstop-2-piece-set
The barrel assembly came off of a barreled upper that I purchased a while back, the barrel is a 1/9 5.56 stainless steel 10.5" barrel with a carbine gas system. The low profile gas block and carbine length gas tube came pre-installed. I'd value the barrel around $100-120.
I'd like to note that the KNS roll pins will not be included, as the trigger that's currently installed will be removed and replaced with a mil-spec trigger assembly. Also, no magazines are included either.
If we do the deal I will obviously require both parties to fill out and sign a bill of sale, to protect both the buyer and seller. If you would rather go through an FFL holder to transfer the firearm I am perfectly ok with that. If you'd like to buy some ammo and meet me at a range to fire and function check the weapon I'd be perfectly ok with that as well. If you have any questions please don't hesitate to text me at 303-518-6212 any time. Thanks for looking! Happy shooting!
