What gun stuff did you do today?

[Khaot1c]

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[ksenter]

coerced my assistant manager to work another Sunday and confirmed with my mother to watch baby Georgia so I can go to the TGD Firearms shoot on Sunday. Not really gun stuff...but kinda, hahahaha. Now I gotta find/buy some more ammo between now and Sunday. I didnt plan on shooting for another couple weeks. awwww shux, bwahahahaha

 

[Garpo]

Not today but a few days ago. Picked up my Stoeger Cougar 8040 and my Kahr CW45 from TGD. As usual, 1911Junky did a great Cerakote job on these two pistols.

 

[FrankT]

Won an auction, great deal, on a 7.62x39 upper, wow at GunBroker, ordered a enhanced bolt and mags today. The new CPD mags are 100%, the hornady 123SST ammo will be ordered and ARP Superbolt comes in Oct. At least I will get the accuracy lacking in an AK out of this ammo with an AR platform!

I need ammo locally if anyone has any to sell, both 556 and x39

Thanks

Feed Ramp Flat Top Receiver
-Upper receiver is machined from solid 7075 billet aluminum
-Black anodized mil-spec finished upper receiver
-Feed ramps for increased feeding reliability on barrel and upper
-Laser etched T-Marked upper receiver
-Stainless Steel 7.62x39 HBAR Barrel
-1/10 Barrel Twist -Chambered in 7.62x39mm
-16" HBAR Profile barrel with M4 Extension
-.750" barrel diameter at gas block
-5/8x24 threaded muzzle/barrel
-Low profile gas block
-Barrel dimpled to secure gas block
-Carbine length gas system
-A2 flash hider
-Tactical 10" Free float quad rail with end cap

 

[fishingjean]

Looking Good!!!!!

 

[1911Junky]

Won an auction, great deal, on a 7.62x39 upper, wow at GunBroker, ordered a enhanced bolt and mags today. The new CPD mags are 100%, the hornady 123SST ammo will be ordered and ARP Superbolt comes in Oct. At least I will get the accuracy lacking in an AK out of this ammo with an AR platform!

I need ammo locally if anyone has any to sell, both 556 and x39

Thanks

Feed Ramp Flat Top Receiver
-Upper receiver is machined from solid 7075 billet aluminum
-Black anodized mil-spec finished upper receiver
-Feed ramps for increased feeding reliability on barrel and upper
-Laser etched T-Marked upper receiver
-Stainless Steel 7.62x39 HBAR Barrel
-1/10 Barrel Twist -Chambered in 7.62x39mm
-16" HBAR Profile barrel with M4 Extension
-.750" barrel diameter at gas block
-5/8x24 threaded muzzle/barrel
-Low profile gas block
-Barrel dimpled to secure gas block
-Carbine length gas system
-A2 flash hider
-Tactical 10" Free float quad rail with end cap

Let me know how she shoots when your done. Been thinking on building myself one too.

 

[FrankT]

Will do, need a charging handle darn it, thought I had a spare!

 

[Khaot1c]

A day on the 550 making some 45 ACP. Some 200 grain semi wad cutters and some 230 grain round nose. All from Xtreme.
we'll see how the new Glock 41 likes it.....

 

[Seanpcola]

Met up with gendoc early this morning. Got to shoot that hog leg .44 mag of his plus his .270 hunting rifle he just finished. Got a good lesson on zeroing scopes and general site adjusting. We also shot my AK off a rest and found out its pretty damn accurate, at least good enough for its intended use.

Side note: irritated a buzzard with my new electric sailplane afterwards. I think John was disappointed that it didn't attack and rip up my new toy.:lever:

 

[gendoc]

hell naw !!!!
I liked that plane... I think I need one of them.

I appreciate the range time and had fun !!!!! can't wait to do it again.

next time i'll bring the other part of the arsenal.

thanks:rockon:

 

[TennJeep1618]

Got 55lbs of X-treme bullets delivered today. Their shipping isn't fast, but they've got great products at good prices.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[HEIST]

I put a light/strobe on my Canik TP9. The controls for the light are in the perfect location for my off hand witch is surprizing since Im a lefty and its designed for right handed people.

 

[bohica793]

Got 55lbs of X-treme bullets delivered today. Their shipping isn't fast, but they've got great products at good prices.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

Jake and I really need to get you pouring your own instead of paying too much.

 

[FrankT]

Got some 7.62x39 and 556 ammo from 2ndAmendmentShooting today, Thanks Aaron!

Also got 1150lbs of corn delivered to my lease today, let the feeding begin!

 

[TennJeep1618]

Jake and I really need to get you pouring your own instead of paying too much.

Meh. I enjoy reloading, but I've never had any desire to cast. Plus these will be shot out of a factory Glock barrel. I know some people choose to shoot lead out of their Glocks, but I'd rather not.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[jogan]

not today, but yesterday I did all kinds of gun stuff! Woke up, went to the garage and put some finishing touches on a kydex mag carrier. Went to the TGD customer appreciation shoot and watched the 500 man handle all comers. Went home, shot about 200 rounds out back. Then back to the garage to put together a pistol lower that I've been slowly gathering parts for. All in all, a good day!

 

[HEIST]

Do you make kydex holsters? I have one I need a holster for. It came with a right handed serpa style holster, but Im left handed.

 

[jogan]

that I do. Pm me for details....

 

[TackleberryMCS]

The only thing gun related I did today was clean the three rifles that were shot at the TGD meet yesterday. Unlike Mr. David Rowe, some of us have to clean our own guns. :smile:

 

[Dan1612]

Nothing today, I'll be cleaning my guns from Sunday, after work tomorrow, after picking up the new Les Baer. Whoo Hoo!

Actually, I'm gonna frog lube them. We'll see how it goes.