Item
PSA/Custom HBAR Mid-length AR-15
Location
North Pensacola
Contact
PM
Price
$800 - No trades
Item Description
This is a heavy-barrel mid-length AR-15 that saw range time and a few competitive rifle matches. Not a safe queen but it wasn’t abused like someone’s “torture test” rifle. It has some cosmetic blemishing (scratched finish on receiver rails where optics were mounted, some marks from sling hardware rubbing the buffer tube/receiver, rail cover scratches, etc.) but has perfect function, it will feed and cycle steel cased ammo reliably (Tula, Wolf, Herters, etc.) as that was what was most commonly shot through it. It is on the heavy end of AR15s and quite loud due to the Dynacomp.
The rifle will include four D&H gray 30 round aluminum magazines with anti-tilt followers, a standard A2 flash hider in addition to the compensator (in the event you want to swap it out, note you will need a muzzle brake wrench and a suitable crush washer) and a Palmetto State Armory shipping box. A bill of sale will be drafted. FL residents only.
Parts breakdown below:
LOWER RECEIVER ASSEMBLY
Receiver: Palmetto State Armory Stripped lower receiver (HK-style safe/fire markings, early ser #)
Lower Parts Kit: Standard Mil-spec
Stock: Magpul MOE
UPPER RECEIVER ASSEMBLY
Receiver: Palmetto State Armory (barreled receiver assembled by PSA)
Barrel: Palmetto State Armory 16" Mid-length (9" gas system) Heavy Barrel (HBAR)
Bolt Carrier Group (BCG): Micro Best (OEM manufacturer) Semi-Auto, MPT/HPI, standard phosphate finish
Charging Handle: Standard mil-spec from Palmetto State Armory
Front sight: F-marked mil-spec
Rear sight: MaTech USGI back up iron sight (BUIS), adjustable windage/elevation
Handguard: Midwest Industries T-Series Gen 2 Drop-In rail system, 9"
PSA/Custom HBAR Mid-length AR-15
Location
North Pensacola
Contact
PM
Price
$800 - No trades
Item Description
This is a heavy-barrel mid-length AR-15 that saw range time and a few competitive rifle matches. Not a safe queen but it wasn’t abused like someone’s “torture test” rifle. It has some cosmetic blemishing (scratched finish on receiver rails where optics were mounted, some marks from sling hardware rubbing the buffer tube/receiver, rail cover scratches, etc.) but has perfect function, it will feed and cycle steel cased ammo reliably (Tula, Wolf, Herters, etc.) as that was what was most commonly shot through it. It is on the heavy end of AR15s and quite loud due to the Dynacomp.
The rifle will include four D&H gray 30 round aluminum magazines with anti-tilt followers, a standard A2 flash hider in addition to the compensator (in the event you want to swap it out, note you will need a muzzle brake wrench and a suitable crush washer) and a Palmetto State Armory shipping box. A bill of sale will be drafted. FL residents only.
Parts breakdown below:
LOWER RECEIVER ASSEMBLY
Receiver: Palmetto State Armory Stripped lower receiver (HK-style safe/fire markings, early ser #)
Lower Parts Kit: Standard Mil-spec
Standard mil-spec trigger with some polishing work
- Replaced standard receiver end plate with Magpul ASAP sling plate
- Carbine buffer weight
Stock: Magpul MOE
- Added Magpul MOE extended butt-pad
UPPER RECEIVER ASSEMBLY
Receiver: Palmetto State Armory (barreled receiver assembled by PSA)
Barrel: Palmetto State Armory 16" Mid-length (9" gas system) Heavy Barrel (HBAR)
Standard barrel nut replaced with Core15 Stressproof model
Bolt Carrier Group (BCG): Micro Best (OEM manufacturer) Semi-Auto, MPT/HPI, standard phosphate finish
Charging Handle: Standard mil-spec from Palmetto State Armory
Front sight: F-marked mil-spec
Rear sight: MaTech USGI back up iron sight (BUIS), adjustable windage/elevation
Handguard: Midwest Industries T-Series Gen 2 Drop-In rail system, 9"
x2 sets of Magpul XTM rail covers
- Magpul AFG
- Midwest Industries quick-detach sling swivel
Attachments
Last edited:
