Reloading
Lee single stage breechlock with 10+ bushings
Lee value turret with 6 turret plates and both direction center spin rods
Bench plate for both presses and workbench
Lee safety prime for both presses.
Lee hand primer
Frankford arsenal Intellidropper powder disp
Frankford arsenal 7L wet tumbler with 7lbs of stainless pins
Frankford arsenal pocket scale
Frankford arsenal stuck case remover
Media separator
Dies for .450bm / .308 with small base resizer/.223/.45acp/.40/9m/38spc(.357). Most pistol calibers have factory crimp die and all set have shell holders. .223 and .308 have trim dies and trimming tools.
Reloading trays from hornady/Frankford arsenal/ and custom 3D printed trays.
Several empty ammo boxes for pistol and rifle Mtm 100 and 50 rounds (empty)
Some mentioned caliber ammo checker
Custom deswager/chamfer/debur/primer pocket cleaning station
Brass and bullets for most mentioned calibers.
Primers - All stored in a dry bin sealed. Not splitting this lot…. *1k large rifle 100 large rifle mag./400 large pistol / 900 small pistol. / 2k small pistol mag/ 800 small rifle
Powder - autocomp 1lb/ silhouette .25 lb/ win231 1lb/ titegroup .5 lb/ lil gun .5lb/ cfe223 .5 lb / sr4756 .25 lb/ accurate 2495 lil bit.
Not splitting from this lot.
**. This is a complete reloading set for all the above mentioned caliber equipment wise. Consumables vary. There are much more smaller items not mentioned like primer arms, bulge busters for .40/9, hornady manual, etc.
Asking 1200 for all obo. Once again not splitting up. Not in need of money just don’t need this set up anymore as I have moved on to another set up.
Sent from my iPhone using Tapatalk
Lee single stage breechlock with 10+ bushings
Lee value turret with 6 turret plates and both direction center spin rods
Bench plate for both presses and workbench
Lee safety prime for both presses.
Lee hand primer
Frankford arsenal Intellidropper powder disp
Frankford arsenal 7L wet tumbler with 7lbs of stainless pins
Frankford arsenal pocket scale
Frankford arsenal stuck case remover
Media separator
Dies for .450bm / .308 with small base resizer/.223/.45acp/.40/9m/38spc(.357). Most pistol calibers have factory crimp die and all set have shell holders. .223 and .308 have trim dies and trimming tools.
Reloading trays from hornady/Frankford arsenal/ and custom 3D printed trays.
Several empty ammo boxes for pistol and rifle Mtm 100 and 50 rounds (empty)
Some mentioned caliber ammo checker
Custom deswager/chamfer/debur/primer pocket cleaning station
Brass and bullets for most mentioned calibers.
Primers - All stored in a dry bin sealed. Not splitting this lot…. *1k large rifle 100 large rifle mag./400 large pistol / 900 small pistol. / 2k small pistol mag/ 800 small rifle
Powder - autocomp 1lb/ silhouette .25 lb/ win231 1lb/ titegroup .5 lb/ lil gun .5lb/ cfe223 .5 lb / sr4756 .25 lb/ accurate 2495 lil bit.
Not splitting from this lot.
**. This is a complete reloading set for all the above mentioned caliber equipment wise. Consumables vary. There are much more smaller items not mentioned like primer arms, bulge busters for .40/9, hornady manual, etc.
Asking 1200 for all obo. Once again not splitting up. Not in need of money just don’t need this set up anymore as I have moved on to another set up.
Sent from my iPhone using Tapatalk
Last edited: