Need a shop around pensacola that can ream a .32 long chamber to 327 federal

[capt.joe]

I bought a smooth bore .32 long adapter for my .410. Looking for someone that can ream it to 327 federal for my shotshell loads. Dang wood rats are reproducing faster than I can trap them.

 

[capt.joe]

Gotta love google. Found an article on how to cut a .32 chamber in 3 passes with 7.8 and 8.5 mm drill bits. Ordered some bits on amazon. Will update on how it goes

 

[SAWMAN]

With drill bits huh ??
Good luck to you sir. ---- SAWMAN

 

[Jdcujo]

Is the chamber insert rated for 327 that's a good bit of difference. To 32 h&r would be one thing. But depending on the manufacturer even thatd be questionable.

 

[capt.joe]

It's a smooth bore adapter that I ordered for a shotshell load i made using #12 shot in a 327 case with a touch of titegroup. It's subsonic and I dont plan on firing bullets through the adapter. I'm going to ream it just enough to get the case to chamber without a bullet. That should keep it idiot proof if it ends up in the wrong hands after I'm long gone

 

[capt.joe]

Wont have to ream much. It was marked 32 h&r