I have a large reloading bench in the garage, but it's either too hot or too cold to load out there. I built this portable reloading bench on a B & D Workmate 225 frame several years ago and I continue to improve on it. The top is clamped and bolted onto the Workmate and it is further strengthened with two 2x4's bolted to the bottom of the top. It is strong, and doesn't move or flex at all. It is also heavy. I have a Redding T-7 Turret Press on backorder to replace the RCBS RC II press and a Dillon "D-Terminator Electronic Scale" on order to replace the Lyman LE 1000 electronic scale that was purchased in 1994 and is now 27 years old and is still going strong. Not shown is a Dillon beam scale and other assorted goodies. I posted this to show what can be done if you are tight on space. This little setup works just perfect for me so I wanted to share.