- Joined
- Jun 9, 2024
- Messages
- 26
- Points
- 3
Purchase the Luth-AR MBA-1 Fixed Stock for AR-15 & AR-10 here!
The Luth-AR MBA-1 (Modular Buttstock Assembly) is a great choice for a precision build intended for shooters running a standard A2 style buffer tube (designed for a fixed stock). It features an adjustable cheek rest which can be raised up to 1″ for a more comfortable cheek weld when using raised optics. You can also extend the length of pull to up to 1 1/16″ using the adjustable buttplate. At only 1.26 lbs, this stock is also much lighter than other similar stocks on the market.
Here are some of our other AR-15 Parts Deals:
UTG Ambidextrous 45/90 Safety Selector - $18.95
Strike Industries Enhanced Bolt Catch – Black - $9.95
Dirty Bird AR-15 Lower Parts Kit Minus FCG & Pistol Grip - $19.95
Leapers UTG 30-Round Polymer AR-15 Magazine - $7.95
Ballistic Advantage 7.5 5.56 Pistol Length Nitride Modern Series Barrel - $69.95
B5 Systems AR-15 Enhanced SOPMOD Lower Build Kit - $89.95
NBS AR-10 / 308 / 6.5 Creedmoor Dual Ejector Bolt Carrier Group – Black Nitride - $99.95
Winchester SGM193500 5.56x45mm NATO M193 55 Grain FMJ Rifle Ammo – 1000 Round Case - $439.95
The Luth-AR MBA-1 (Modular Buttstock Assembly) is a great choice for a precision build intended for shooters running a standard A2 style buffer tube (designed for a fixed stock). It features an adjustable cheek rest which can be raised up to 1″ for a more comfortable cheek weld when using raised optics. You can also extend the length of pull to up to 1 1/16″ using the adjustable buttplate. At only 1.26 lbs, this stock is also much lighter than other similar stocks on the market.
Product Description
- Fully Adjustable Buttstock assembly to mount to a rifle (A2 Round Standard Tube) ““ This is our fixed stock
- Additional 1″³ height on cheek rest
- Additional 1 1/16″³ length of pull with extended length buttplate
- Approximately half the weight of competitors’ adjustable stocks The “MBA” weighs just 1.26 lbs.
- Fits all .223 and most .308 AR style rifles
- Super Strong Glass Filled Nylon
- Comes with A1 Buttstock screw to connect to A2 standard buffer tube
- Incorporates Castle Nut and Lock Ring in the design
- Easy to replace and quick to install
Features
- Modular buttstock assembly for the AR
- Interchangeable with standard A1 or A2 buttstocks or any aftermarket buttstock with overall length of approximately 10.5″³
- Fully Ambidextrous and can be comfortably used shooting off either shoulder (Cheek piece pre-installed for right handed shooters but can be installed on either side for right or left hand shooters)
- Cheek piece not only moves up and down, it also moves back and forth on the stock
- NOT interchangeable with carbine/collapsable rifles with telescoping assemblies (6-position tubes). You will need to purchase a MBA-3 or MBA-4 to fit these carbine tubes
Compatible Buffer Assemblies:
- .223 Rifle Buffer Assembly (A2 Round Standard Tube)
- .308 Rifle Buffer Assembly (A2 Round Standard Tube)
- A2 Round Standard Receiver Extension / Buffer Kit
- QD Sling Swivels
Here are some of our other AR-15 Parts Deals:
UTG Ambidextrous 45/90 Safety Selector - $18.95
Strike Industries Enhanced Bolt Catch – Black - $9.95
Dirty Bird AR-15 Lower Parts Kit Minus FCG & Pistol Grip - $19.95
Leapers UTG 30-Round Polymer AR-15 Magazine - $7.95
Ballistic Advantage 7.5 5.56 Pistol Length Nitride Modern Series Barrel - $69.95
B5 Systems AR-15 Enhanced SOPMOD Lower Build Kit - $89.95
NBS AR-10 / 308 / 6.5 Creedmoor Dual Ejector Bolt Carrier Group – Black Nitride - $99.95
Winchester SGM193500 5.56x45mm NATO M193 55 Grain FMJ Rifle Ammo – 1000 Round Case - $439.95
