Ithaca model 37 project complete.

[J pace]

Browning A5, Remington 1100 basically any shotgun with a removable cap this should work good

 

[DAS HUGH!]

Cool. I'll get mine out soon and check into that. Only other option I like is the find a sheet of brass about 3/8 or so thick. And trace my old barrel band outline on it. Then take a jewelers saw and cut a new one out with an added spot for a lug hole. Then round off the edges with a file to match the original. Would take about 2-3 hours with the right tools. That looks alot easier tho. Thanks bud

Sent from my SM-G988U using Tapatalk

 

[FLT]

That’s pretty close to where the factory sling stud is on a deer slayer barrel. They came from the factory with a screw installed , but

the stud was in the box . I’ve never installed A sling on this one , so the screw is still in place.

 

[JedClpIT]

The second piece goes inside the cap, right? So you just need the clearance for it?[m12]

 

[J pace]

If you picked the right swivel kit it don't take up much room on the inside

 

[JedClpIT]

Thanks, J pace. you are a wealth of knowledge.

 

[J pace]

View attachment 149926

save that piece of cut off Barrel it's good for practicing your Technique, making sure you drill the right size hole for the tap and that sort of thing

 

[J pace]

Another thing to keep in mind once you get the new bead on it's going to stick through to the inside of the barrel. You either have to take it back out and trim some off or use a Dremel grinder on the inside of the barrel .