Colt pump action lightning .357 stuck and ruptured case

[Raven]

This happened to me with a CZ52 and thin walled cheap PPU brass. I broke a near new Leatherman multitool on the firing line digging it out. Maybe if you can find a really skinny set of 90 degree hooked pliers to reach up in there? $5.89 at Harbor Frieght. Don't use cheap ammo anymore. Especially that brand. Or it'll just happen again.

 

[.22 cents]

Age Verification - NRA

Hey look what I found. They say to disassemble the gun first though.

Also this.

 

[indy1919a4]

Have used a bore snake in the past.

Come in from muzzle to receiver, make the snake alittle tighter by adding a cleaning patch or two around the section and liberal amounts of oil in the barrel.

Good luck they pretty guns..

Are we talking about a real Colt lightning or one of the clones..???

 

[oneshot]

Give me a call I think I can save you a lot of trouble, don;t use the pliers or the pick. If what I have done before works will take about 5 mins or less. jj 850-672-6611

 

[FrankT]

JJ--oneshot....he will fix and you will not sweat

 

[850guns]

Age Verification - NRA

Hey look what I found. They say to disassemble the gun first though.

Also this.

Nice

ppl

Give me a call I think I can save you a lot of trouble, don;t use the pliers or the pick. If what I have done before works will take about 5 mins or less. jj 850-672-6611

Thanks.

 

[850guns]

Thank you guys for all the help. I decided to let a professional do the job. I already spent money on the brass rod. And that's about all I want to do to it. I will call one shot when I get my ducks together.

 

[Jhunter]

If you can get a nylon .45 brush pushed through the breach just past the stuck case then pull back out of the breach it could save you a few dollars and do no harm. The brush will lay down to .357 and create a hook to pull back against

 

[Duckyou]

What about using a tap that would bite into the case without being big enough and pull it out (or tap it out with a brass rod).

 

[Mullet Hunter]

I think you should sell it to Mullet Hunter for a hundo….. “I can fix it”—- “I can fix it” “My dad has an awesome set of tools”


guess the movie..