Anyone using Quickload software that can run some numbers for me?

[kidsoncoffee]

Looking to load some Hornady 30cal 150GN SP Interlocks for my 30-06 with some Varget and Federal No.210 LRP. Barrel is 22" length with 10" twist. Once fired remington brass will be used. 2700FPS would be ideal for me. I only have one manual that will reference this load and looking for some other data to cross reference. My manual is the Hornady 7th edition. My lyman 49th doesn't list the load. Any help is appreciated. Also, if you have quickload, I'd offer to buy a copy at a discounted rate if it's older and not quite updated. Or if you have an extra manual that isn't the lyman or hornady, I'd buy that as well if it has relative load data. Thanks.

 

[Jester896]

11th edition Hornady manual says they used a 1:10 23 3/4" Winchester Model 70.
Starting load is 44.9 @2500fps and max is 53.6 @2900fps. 2700fps is 49.2 as far as their results.

 

[kidsoncoffee]

11th edition Hornady manual says they used a 1:10 23 3/4" Winchester Model 70.
Starting load is 44.9 @2500fps and max is 53.6 @2900fps. 2700fps is 49.2 as far as their results.

Thanks brotha

 

[kidsoncoffee]

11th edition Hornady manual says they used a 1:10 23 3/4" Winchester Model 70.
Starting load is 44.9 @2500fps and max is 53.6 @2900fps. 2700fps is 49.2 as far as their results.

You showing a COL of 3.230 for that round?

 

[Jester896]

3.210

 

[Longtooth]

@SAWMAN

 

[fla_gun]

 

[kidsoncoffee]

View attachment 158364

Thanks a ton sir!! That's the info I was hunting. May just have to pony up the money and buy that program. I'm starting to try to get a lot more accurate with these .30 loads. I've got the equipment, I just need the data.

 

[fla_gun]

You're welcome.